Advertisement
Notice
For the need of technical improvement and system upgrade,
information contained herein may be subject to change
from time to time without prior notice.
Copyright 2008
All Rights Reserved.
Manual Edition 1.1, Feb. 2008
Printed in China
www.edifier.com
EDIFIER INTERNATIONAL LIMITED
Made in China
IMPORTANT SAFETY INSTRUCTION
Thank you for purchasing this Edifier product. For generations, Edifier tries to provide powered speaker products to satisfy the need of our
end customers, even the most demanding ones. This product can add to your home entertainment, personal computer, and mini home
theater great sound performance. Please read this manual carefully to obtain the best of this system.
The lightning flash with arrowhead inside the
To prevent the risk of electric shock, do not remove
triangle, is intended to alert the user to the
cover (or back).No user-serviceable Parts inside. Refer
presence of un-insulated dangerous voltage
servicing to qualified Service personnel only.
within the product's enclosure that may be of
a sufficient magnitude to constitute a risk of
electric shock to persons.
SAFETY INSTRUCTIONS
Please read all the instructions herein.
Please retain this manual safely for future reference.
Please heed all safety warnings.
Please install in accordance with the manufacturer's instructions.
Please adjust the volume control to a comfortable level to avoid damaging your hearing and the system.
the apparatus.
Prevent risk of fire or electric shock hazards, and provide sufficient space around the speakers for proper ventilation.
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped. Refer all servicing to qualified service personnel only.
1
English
Illustrations and Functional Depict
1. Audio input
PC: to PC signal
2. Digital inputs
Besides the analog inputs, the system has digital inputs, and they have higher priority over the analog
digital signals are removed, system will return to play from analog inputs.
3. Connector for wired controller
4. Satellite speaker output
5. Power switch
6. Fuse
7. Socket for power cord
8. LCD display on wired controller
9. "Function/Adjustment" knob
"Subwoofer adjustment", "Bass trimmer", "Treble trimmer",
"Left-right balance", "Backlight dimmer", indicating that you can access sequentially these adjustments.
Rotate this knob to increase / decrease the master volume, subwoofer volume, bass / treble trimmer,
left-right balance and backlight dimmer (range of adjustment will be specified in "Guidance of using remote controller")
10. STBY/ON
Press and hold this button when system active to set it back to sleep.
11. Input selection/ Return
When operating in trimmer, balance and dimmer mode, press this button will instantly
get the system back to master volume control.
12. Headphone output
Master volume and EQ setting still work in headphone mode.
3
English
Guidance for using remote controller
Point the remote controller to the IR window on wired controller when operating the remote controller.
The optimum operational distance is 7 meters. When a remote command is received and executed,
figures shown in LCD display will blink.
1. "
" -- STBY/ON key
Press this button to set the system on / STBY. If main power
turn off the main power switch when unused for a long period
of time.
2. "MUTE"
Press this button when system in working mode will instantly
shut off the speaker output. Press one more time this button
will recall the speaker output.
3. "VOLUME +/-" keys -- Adjust the master volume
The master volume can be adjusted from 0 to 50, and there
is 6 level volume booster to get you extra power. Press the
volume to level 50 and hold the "+" key to enter the boost mode.
4. "BAL.L /BAL.R" keys -- Left and right channel balance
5. "TRE +/-" keys -- Treble trimmers
5
English
Specification
Input type:
3.5mm stereo jack
Input impedance:
10K ohm
Input sensitivity:
Satellites: 650mV 50mV (PC)
1200mV
Subwoofer: 250mV 50mV (PC)
450mV
Adjustment:
Master volume control, bass / treble trimmer,
left / right balance on wired controller and remote controller
Mid-range unit:
3.5 inch, magnetically shielded, 4ohm
Treble unit:
25mm silk dome tweeter, magnetically shielded, 6ohm
Gross weight:
Approx. 30 kg
Warnings:
Please do not feed powered signal from another amplifier into the input ports of this system!
Please adjust to a comfortable volume to avoid damaging your hearing and the system!
Refer to qualified personnel for servicing.
Please remove the power plug if the system is unused for long period of time.
Please do not expose the system in rain or moisture environment.
Please do not place vase or utensil full of liquid on the speaker.
7
English
S730
User's Manual
Please carefully read this manual before operating the system
The exclamation point inside the triangle is intended
to alert the user to the presence of important
operating and maintenance (servicing) instructions
in the literature accompanying the product.
S730
Right satellite speaker
6. "BAS +/-" keys -- Bass trimmers
7. "SW +/-" -- Subwoofer adjustment
8. "CD" -- Direct the system to get signal from CD input;
9. "PC" -- Direct the system to get signal from PC input;
10. "LIGHT" key -- Recursively adjust the brightness of the LCD screen, from 1 to 7;
11. "ESC" key -- Force the system back the master volume adjustment interface during trimmer,
balance and back light adjustments.
12. "DI" key -- Direct the system to get signal from digital inputs;
Battery loading:
Please refer to the figure on the right side to open the battery
compartment, load the included C2025 battery and shut
the compartment.
The battery (battery or batteries or battery pack) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Note:
Not all speakers function:
One satellite speaker does not function when playing CD from computer:
System does not work at all
1. Please check if power is connected, and if the wall outlet is switched on.
2. Please check if the amplifier is still in STBY mode
3. Please check if the master volume is turned to minimum
4. Please check if the audio input cable is connected correctly
5. Please check if there is signal from audio source
Noise coming from speakers
are too high. Please keep the system in active mode and remove the audio source, if no sound can be heard at 1 meter away from the
system, then there is no problem with this product.
Magnetic interference
This system is complete magnetically shielded, and can be placed near TV or monitor. But since magnet of the subwoofer driver is large,
some magnetism leakage is inevitable when the system is too close to the monitor, and it is recommended to keep a 1 meter distance
between the speaker system and monitor or TV set.
System can not switch to analog signal input with digital input ports plugged in
priority). Power off the source of digital signal or unplug the optical or coaxial inputs, then the system will switch to analog inputs.
System does not work with Dolby Digital (AC-3) signal
If you have any further questions or concerns regarding Edifier Products
Please visit our website at: www.edifier.com, or email Edifier Support for further
assistance at: main@edifier.com, If you prefer, you may contact us by phone,
Toll Free: 1-877-EDIFIER (334-3437).
Multimedia Speaker
Box content
Subwoofer
2 satellite speakers
Wired controller
Remote controller
3.5mm to dual RCA connector cable
2 Speaker cables
Audio connecting cable
Satellite speaker
Speaker cable
Remote controller
English
Coaxial Input
PC: to PC signal
To A.C. power
English
English
English
English
Unpack the box
Subwoofer
Wired controller
2
Making connections
Wired controller
S730
Left satellite speaker
4
Guidance for using remote controller
6
Troubleshooting
8
Advertisement
