Override Set Temperature - Systems Controls & Instruments CEM-24 Series Owner's Manual

Table of Contents

Advertisement

6.2. Weekly Program Mode and Manual Mode.
You can change between weekly program and Manual program, by pressing and
holding (3 seconds) the Prog button in normal display.
When the weekly program is activated, the clock symbol and the word "Program", (in
brackets) will be displayed.
The clock symbol and Program, in brackets, will not be displayed in Manual Mode.
6.3. Review the Program
You can review the program or change part by entering into the program mode
and step quickly through by pressing Clock button.

7. Override Set Temperature

• At anytime you can change the temperature by pressing the '+' and '-' buttons.
• The new temperature will be retained until the next program start.
• If the thermostat was in program mode, then the number of the program will
disappear until the next program.
18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CEM-24 Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents