In auto change-over mode – a solid "|" or "||" signs will flash next to the mode to
indicate the active stage (HEAT 1 or HEAT 2, COOL 1 or COOL 2). Solid non-
flashing "|" will appear next to the mode to indicate that none of the stages is
currently active and the displayed set-point temperature is of that mode.
Display of set- - - - point temperature for heat
Display of set
Display of set
Display of set
HEAT
COOL
Display of of of of set
Display
Display
Display
HEAT
COOL
5.5 Selecting fan/auto fan
Press the Auto Fan button to switch between:
FAN ON – The fan will work continuously.
• • • •
Auto Fan – The fan will work according to cooling/heating demand ("AUTO
•
FAN" appears on display)
In Oil/Gas systems, in heat mode, switching to Auto Fan mode will
stop the fan (the Fan will NEVER turn on).
point temperature for heat
point temperature for heat
point temperature for heat
SET
TEMP
set- - - - point
point temperature
temperature for
set
set
point
point
temperature
temperature
SET
TEMP
Heating mode active
Heating mode active
Heating mode active
Heating mode active
SET
HEAT
COOL
for cool
cool
Cooling mode active
Cooling mode active
for
for
cool
cool
Cooling mode active
Cooling mode active
SET
HEAT
COOL
TEMP
TEMP
13
Need help?
Do you have a question about the CEM-24 Series and is the answer not in the manual?