Advertisement
to pair, then play
to play
Bluetooth Mode
NOTE: Clean rubber pad on
bottom of speaker with damp
cloth for best performance
to play
mobile phone
PSP
iPod
MP3/MP4
PC
Laptop
Aux-in Mode
Speaker back view
Line out Jack
USB Audio/
Charging Jack
3.5mm audio
plug
Micro USB plug
Computer connected
to working outlet
Standard
USB plug
USB AC adaptor
Combination cable
connected to working outlet
Speaker left view
LED
Off/On/
Bluetooth
Switch
Charging the iBT65
CHARGE BEFORE USE
Computer USB port
USB AC adaptor
(not included)
Locking and Unlocking the iBT65
To compress and lock speaker, gently press speaker down from the top
and twist clockwise to lock in place.
To unlock and expand the speaker, grip the top and bottom and give a
small twist counter-clockwise. DO NOT pull hard once open, as the built
in spring will automatically extend the speaker to its proper position.
Charging the iBT65
The iBT65 is powered by a rechargeable battery in the speaker. Make
sure to charge speaker before use.
• Connect the micro-USB plug to the
on the speaker.
• Connect the larger USB plug to a powered USB port, such as that on a
computer. Your computer should be connected to a wall outlet when
speaker is charging. The light on the speaker will turn to solid red while
charging and turn off when fully charged.
When the light dims or if you start to notice sound distortion at higher
volumes, it's time to recharge the batteries.
Using Bluetooth with the iBT65
Using Bluetooth with the iBT63
• Slide the of Off/On/Bluetooth Switch on the speaker to the Bluetooth
position ( ). The light will flash blue and red as the speaker attempts to
pair with a Bluetooth device.
• Place your audio device in Bluetooth mode (often found in the device's
Settings or Tools menu) and make it "discoverable". "iHome iBT65"
should appear on your device. If "Not Connected" or similar message
appears, select it to connect. If your device asks for a passcode, enter
'1234'.
• Once paired, the light will glow solid blue. You can then stream audio to
the speaker. If pairing is not successful, turn the power OFF (
speaker and repeat pairing procedure.
• To listen to Bluetooth audio, make sure the Off/On/Bluetooth Switch
on the speaker is in Bluetooth (
) or ON (
• Control Bluetooth audio from your device.
Remember to turn off the speaker and your device after listening.
NOTE: When unit is charging, the blue light will appear solid red.
Using the iBT65 with Aux Devices
• Connect the micro-USB plug to the
on the speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack or line-out
of any audio device.
• Slide the Off/On/Bluetooth Switch on the speaker to the ON (
position. The blue power light will flash, indicating auto-link mode.
• Press play on your audio device and adjust its volume to listen to audio.
• If you wish to "daisychain" iBT65 speakers, connect the 3.5mm audio
plug to the Line Out Jack on an iBT65 that is already connected to an
audio source (see above) and the micro-USB plug to the audio input
jack on another iBT65.
USB Audio/Charging jack
) on the
) position.
USB Audio/Charging jack
)
Advertisement
