Control Panel - DeLonghi CF08E User Manual

Control Panel

Indicator lamp
1. Full : Tank full indicator lamp
It will light when the drainage tank is full or positioned incorrectly. Empty the water out of the drainage tank,
and make sure the tank is positioned properly.
2. On/Off" :Power indicator light.
It will light when the unit is plugged in.
3. Normal", Hi", Quiet":mode indicator light.
Indicates mode of dehumidification selected.
4. "50%", "60%", "70%":Humidity indicator light.
This indicates that the current humidity setting is "50%",
"60%" or "70%" respctively.
5. The"Continuous"light indicates the unit is operating in
cotinuous mode.
Switch function
1. "On/Off" switch
Press the switch once to turn the dehumidifier on, press it again to turn it off.
2. "Mode" switch
Each time the switch is pressed, the mode changes in the order of "Normal", "High" and "Quiet"
and the corresponding mode indicator lamp will change with the mode of operation.
3. "Humidity" switch
Press the switch to set the humidity of the room, which can be set in order of "50%", "60%" "70%" and
"continuous", and the corresponding humidity indicator lamp will light to display your setting humidity.
When the relative humidity of the room is lower than your humidity setting, the unit will turn off
automatically.
When the unit is initially started, the default operation is the continuous mode.
In this mode the unit will run until manually turned off,or the water tank is full.
- 4 -