Philips Norelco Aquatec AT895 User Manual page 24

ENGLISH
24
C
C
1
2
C
5 sec.
5 Remove the razor heads and place the
new razor heads in the shaving unit.
Make sure that the two pointy edges of the head
fit exactly into the recesses.
6 Replace the frame and turn the lock
clockwise until it locks into place.
7 Insert the notch of the shaving unit into
the slot in the top of the razor (1) and
then close the shaving unit (2).
8 Press and hold the on/off button for at
least 5 seconds to reset. The orange razor
head replacement indicator symbol will go
out.
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.
This razor has no other user-serviceable parts.
For assistance call 1-800-243-3050.