Page 2
FOLLOW THESE INSTRUCTIONS user guide Thank you for choosing a Cosatto product. Please take a little time to read the important safety notes detailed below. This will ensure many years of happy, safe use. The instruction manual should be kept safely with child car seat for its life period:...
Page 3
• Cosatto advise that child car seats should not be brought or sold second-hand. Many seats sold through local advertising and car-boot sales have been found to be dangerous.
storage of instruction manual The instruction manual should be kept safely with child car seat for its life period: There is a pocket in the back of the seat cover for storage of the instruction manual. Lift the backrest to its highest position (a) and pull the top of the seat cover out (b). Slide the instruction manual into the pocket then push the seat cover back in place.
Page 5
create more space for an older child. You can use the harness with your child as long as the shoulder harness fit your child’s shoulder correctly. To loosen the harness, push the adjuster button (f) in as you pull the shoulder harness forward as much as possible (g).
Page 6
7 - installation of the car seat 9 to 18kg (group 1 - approx. 9 months to 4 years old) - part 3 Loosen the harness by pushing the adjuster button (a) in as you pull the shoulder harness (b) forward as much as possible.
Page 7
10 - installing the child car seat 15 to 36kg (group 2 & 3 approx. 4 to 11 years old) Place the child car seat in the forward facing position on the vehicle seat. Pull the vehicle seat belt and thread the diagonal belt through the slot in the side of the backrest (a) and the lap belt under the seat belt guide (b).
Page 8
12 - refitting the covers for cleaning Seat: Lay the seat cover over the child car seat. Fit the clips at the rear of the armrests (a). Fit the elastic loops (b) around the seat belt guides. Fit the beaded edge of the seat cover (c) into the groove all around the child car seat (d). Note: A flat edged screwdriver or a similar tool may be required to push the beaded edge of the seat cover into the beaded slot in the child car seat.
care Your child car seat has been designed to meet safety standards and with correct use and maintenance will give many years of trouble free performance. Storing a damp child car seat will encourage mildew to form. After exposure to damp conditions, dry off with a soft cloth and allow to dry thoroughly before storing.
The replacement parts shown below are available for your product. In the event that you require any of these parts, please contact your local distributor. For the contact information for your local distributor please refer to http://www.cosatto.com/stockists If you are a UK or Ireland customer, please contact us at spares@cosatto.com Backrest cover Chest pads...
Page 25
SIGN UP SIGN UP log onto cosatto.com/3towin join the conversation... @Cosatto_Tweets follow us on... facebook.com/clubcosatto...
Need help?
Do you have a question about the Scootle Nitty Gritty and is the answer not in the manual?
Questions and answers