If the remote start procedure is used again before the
first 10 minute time frame has ended, the first 10 minutes
will immediately expire and the second 10 minute time
frame will start.
The remote vehicle start feature will not operate if any
of the follow occur:
•
The remote start system is disabled through
the DIC.
•
The vehicle's key is in the ignition.
•
The vehicle's hood is open.
•
The hazard warning flashers are on.
•
The check engine light is on. See Malfunction
Indicator Lamp on page 3-40.
•
The engine coolant temperature is too high.
•
The oil pressure is low.
•
Two remote vehicle starts have already been used
for that ignition cycle.
2-8
Vehicles that have the remote vehicle start feature are
shipped from the factory with the remote start system
enabled. The system may be enabled or disabled through
the DIC. See "REMOTE START" under DIC Vehicle
Personalization on page 3-54 for additional information.
Remote Start Ready
If your vehicle does not have the remote vehicle start
feature, it may have the remote start ready feature.
This feature allows your dealer/retailer to add the
manufacturer's remote vehicle start feature.
If the RKE transmitter has a plus (+) symbol on the
back cover, your vehicle has the remote start ready
feature.
See your dealer/retailer if you would like to add the
manufacturer's remote vehicle start feature to your
vehicle.