Kyocera ECOSYS P7035cdn Operation Manual page 104

Copies:
(1 - 999,---)
---
*****copies
Accepted.
Quick Copy:
l
User01
l User02
l
User03
l User01:
All Files
Q
Data01
Q
Data02
4-32
2
a b
M
3
Deleting a Proof-and-Hold Job
Saved jobs are automatically deleted when you turn the printer off, but
you can also use this procedure to delete jobs individually.
1
2
a b
3
4
a b
g
g
[ Select ]
5
Press  or  to select Print. The Copies menu screen appears.
If you want to change the number of remaining copies to be printed,
use the arrow keys to set the number of copies to be printed.
Press  or  to increase or decrease, respectively, the value at the
blinking cursor.
Use  and  to move the cursor right and left.
Note --- is displayed first, and it means it according to the set
number of copies when the data of each file is preserved. In this
setting, each set number of copies is printed.
Press [OK]. The message Accepted. appears and the printer prints
the selected job.
In the Job Box menu, press  or  to select Quick Copy.
Press [OK]. The Quick Copy screen appears listing the user names
for stored jobs.
Press  or  to select the user name you entered in the printer
driver.
Press [OK]. The printer displays a list of the jobs stored under the
selected user name.
Press  or  to select the name of the job to be deleted.
When [Select] ([Right Select]) is pressed, the file is selected. A
checkmark will be placed on the right of the selected file.
Select the checkmarked file and press [Select] ([Right Select])
again to cancel the selection.
Note To select all files, follow the steps of Select/Deselect All
Files on page 4-29
Using the Operation Panel