Table of Contents
Advertisement
Setting Up the Speakers (continued)
3
Make settings
E
N
G
5-6 Speaker
L
Adjust the Speaker Delay Times
Delay
I
Set a delay for the output from center and surround speakers so that the sound from the
S
other speakers reaches the listening position at the same time as the front speakers.
H
11
Center
Speaker
What has been set will be reflected only with
Dolby Digital play.
<Speaker Delay>
Select
1. 0.0 msec
Speaker Delay
2. 1.3 msec
3. 2.6 msec
4. 3.9 msec
5. 5.3 msec
6. Return
1. 0.0 msec (default)
2. 1.3 msec
3. 2.6 msec
4. 3.9 msec
5. 5.3 msec
6. Return: The display returns to Main Menu.
7 Speaker
Adjust the Speaker Output Levels
Level
Using a test signal, adjust the audio output of each speaker so that the volume
level from every speaker sounds equal. (Adjustable range: 0 to ` 12 dB)
The speaker (in yellow) specified by the number buttons outputs a test signal.
The setting value is shown on the main unit display.Upon completion of the speaker
settings, select "7. Return" and exit. (default : 0dB)
<Speaker Level>
Select
1. L ch
2. C ch
Speaker
3. R ch
4. RS ch
5. LS ch
6. SW
7. Return
1. L ch
2. C ch
3. R ch
4. RSch
5. LS ch
6. SW
7. Return: The display returns to Main Menu.
Notes:
≥ The test signal is not output from a speaker for which " ` ¶" was set. (
≥ After increasing the volume level and adjusting the test signal, restore the original optimum
volume level.
30
CQ-DVR7000U
Surround
Speaker
What has been set will be reflected only when
Dolby Digital play is performed or when ON is
set for PROLOGIC.
<Speaker Delay>
Select
1. 0.0 msec
Speaker Delay
2. 5.3 msec
3. 10.6 msec
4. 15.9 msec
5. Return
1. 0.0 msec
2. 5.3 msec (default)
3. 10.6 msec
4. 15.9 msec
5. Return: The display returns to Main Menu.
To adjust the speaker level:
Press
To adjust the test signal volume:
VOL
Press
page 55)
Indicates pressing a button.
3
Make settings
8 Down Mix
Combining the Speaker Output
When listening to Dolby Digital encoded material (the "Î DIGITAL" indicator will
light), the signals for each speaker channel can be combined and output as stereo.
(Down Mix)
1. ON
<Down Mix>
Select
1. ON
Down Mix
2. OFF
3. Return
2. OFF
3. Return : The display returns to Main Menu.
Lights when Down Mix is ON.
Notes:
≥OFF is recommended as the setting when surround speakers and center speaker are used.
≥In the PRIVATE MODE ( page 60), the disc will be played with Down Mix at "ON"
regardless of the setting which has been selected.
: Down Mix (2-channel stereo playback)
Use this setting when only front speakers are
connected.
≥ The C, LS, and RS signals are combined with
and output through L and R.
: Recorded signal format
(Example: 5.1-channel surround playback)
(default)
L
R
C
S
LS
RS
S W
DOWN MIX
REAR PLAY
LFE
CQ-DVR7000U
E
N
G
L
I
S
H
12
31
Advertisement
Table of Contents
