Advertisement
OPERATION
1. Make sure the amplifier or receiver is OFF and set the volume to minimum.
2. Set the TBL-75 volume to maximum (fully clockwise).
3. Turn on the amplifier or receiver and select a music source, such as tuner or CD
player:
4. Slowly turn up the amplifier or receiver volume and set it to a comfortable (not maxi-
mum) listening level. Be careful not to overdrive your amplifier: If the sound becomes
muddy or distorted, you have reached the limit of your amplifier's volume capability
and should quickly reduce the volume to avoid damaging your speakers.
NOTE: 12 o'clock (50%) on most receivers is full volume. An amplifier that is being
driven beyond its potential will produce
DIC
voltage (clipping) which will not pass
through a transformer, resulting in improper signal transfer and possible damage to
volume control and amplifier.
5. Adjust the volume of the speakers to the desired listening level using the TBL-75.
6. You can turn off the speakers in each room by turning the knob on the TBL-75 com-
pletely counter-clockwise.
IMPORTANl: If you are unsure of any of the installation procedures, the products
should be installed by a professional custom installer:
SPECIFICATIONS
6
Power Handling:
# of steps:
Total Attenuation:
Frequency Response:
Impedance Multipliers:
Terminations:
Wire Size;
Dimensions:
Weight:
126 Wattslch. power handling, 42 watts/ch. RMS
12 steps, including "Off"
43db
20Hz - 20kHz, + 1/-.5dB at rated power
1X, 2X, 4X and
ax
Spring-loaded terminals
Up to 14 gauge wire
6.0W x 6.50 x 1.875H inches
(15.2 x 16.5 x 4.8 cm)
2.5 Ibs. (1.14kg)
OPERATION
1. Make sure the amplifier or receiver is OFF and set the volume to minimum.
2. Set the TBL-75 volume to maximum (fully clockwise).
3. Turn on the amplifier or receiver and select a music source, such as tuner or CD
player:
4. Slowly turn up the amplifier or receiver volume and set it to a comfortable (not maxi-
mum) listening level. Be careful not to overdrive your amplifier: If the sound becomes
muddy or distorted, you have reached the limit of your amplifier's volume capability
and should quickly reduce the volume to avoid damaging your speakers.
NOTE: 12 o'clock (50%) on most receivers is full volume. An amplifier that is being
driven beyond its potential will produce
DIC
voltage (clipping) which will not pass
through a transformer, resulting in improper signal transfer and possible damage to
volume control and amplifier.
5. Adjust the volume of the speakers to the desired listening level using the TBL-75.
6. You can turn off the speakers in each room by turning the knob on the TBL-75 com-
pletely counter-clockwise.
IMPORTANl: If you are unsure of any of the installation procedures, the products
should be installed by a professional custom installer:
SPECIFICATIONS
6
Power Handling:
# of steps:
Total Attenuation:
Frequency Response:
Impedance Multipliers:
Terminations:
Wire Size;
Dimensions:
Weight:
126 Wattslch. power handling, 42 watts/ch. RMS
12 steps, including "Off"
43db
20Hz - 20kHz, + 1/-.5dB at rated power
1X, 2X, 4X and
ax
Spring-loaded terminals
Up to 14 gauge wire
6.0W x 6.50 x 1.875H inches
(15.2 x 16.5 x 4.8 cm)
2.5 Ibs. (1.14kg)
Advertisement
