Advertisement
!
CAUTION
• Do not use the
adapter to power a
device that exceeds
the 80W maximum
power rating.
• Make sure the
adapter is
disconnected from
the AC outlet and
your computer before
adjusting its voltage
setting.
• Make sure you set the
power adapter to the
proper voltage before
you connect the
power adapter to an
input power source.
Ô
Ô
NOTE
The notation "V DC"
might not be indicated.
Instead, the
international symbol
might be used.
4
Your power adapter is ETL listed to UL
!
standards and meets all applicable
FCC standards.
ADJUSTING THE
OUTPUT VOLTAGE
1. Determine the required output
voltage setting of the power
adapter by one of the following four
methods:
• Refer to "Compatible
Computers" on Page 11 for
voltage, tip color, and polarity
settings.
• Note the voltage indication
marked next to the input jack on
the device to be powered.
Example: Vin = 18V DC or
18VDC.
• Review the power or ID plate on
the device to be powered. Look
for the word "INPUT" followed
by a number and V DC.
Example: INPUT: 18V DC. Ô
• Review the power or ID plate on
the AC power adapter usually
used to power the device. Look
for the word "OUTPUT" followed
!
Advertisement
