Main Unit - Philips BDP1200 User Manual

If you have problems using this player, check the following points before you request
service. If you still have a problem, register your player and get support at www.philips.
com/support.
If you contact Philips, you will be asked for the model and serial number of this player.
The model number and serial number are on the back of this player. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Main unit

The buttons on this player do not work.
•
Disconnect this player from the power supply for a few minutes, and then
reconnect.
Picture
No picture.
•
Make sure that the TV is switched to the correct source input for this player. .
No picture on HDMI connection.
•
Make sure that the HDMI cable is not faulty. If it is faulty, replace with a new HDMI
cable.
•
On the remote control, press
recover picture display. Or wait for 10 seconds for auto recovery.
• If this player is connected to an unauthorized display device with an HDMI cable,
the audio and video signals may not be output.
The disc does not play high-definition video.
•
Make sure that the disc contains high-definition video.
Sound
No audio output from the TV.
•
Make sure that the TV is switched to the correct source input for this player.
No audio output from the loudspeakers of the external audio device (home theater
or amplifier).
• Switch the external audio device to the correct audio source input.
No sound on HDMI connection.
•
You may not hear any sound from the HDMI output if the connected device is non-
HDCP compliant or only DVI-compatible.
No secondary audio output for Picture-in-Picture feature.
• When [Bitstream] under the [HDMI Audio] or [Digital Audio] menu is selected,
interactive sound like secondary sound for Picture-in-Picture feature is muted. De-
select [Bitstream].
and then press "731" (numeric buttons) to
EN
17