Electromagnetic Compatibility (Emc); Regulatory Information - Axis P3904-R Installation Manual

Regulatory Information

Europe
This product complies with the
applicable CE marking directives
and harmonized standards:

• Electromagnetic Compatibility (EMC)

Directive 2004/108/EC. See
Electromagnetic Compatibility (EMC).
• Low Voltage (LVD) Directive 2006/95/
EC. See Safety.
• Restrictions of Hazardous Substances
(RoHS) Directive 2011/65/EU. See
Disposal and Recycling.
A copy of the original declaration of
conformity may be obtained from Axis
Communications AB. See Contact
Information.
Electromagnetic Compatibility
(EMC)
This equipment has been designed and
tested to fulfill applicable standards for:
• Radio frequency emission when
installed according to the instructions
and used in its intended environment.
• Immunity to electrical and
electromagnetic phenomena when
installed according to the instructions
and used in its intended environment.
USA
Using an unshielded network cable
(UTP) - This equipment has been tested
using an unshielded network cable (UTP)
and found to comply with the limits for a
Class A digital device, pursuant to part 15
of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates,
uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instruction manual,
may cause harmful interference to radio
communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case
the user will be required to correct the
interference at his own expense.
Using an shielded network cable
(STP) - This equipment has also been
tested using a shielded network cable
(STP) and found to comply with the limits
for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are
designed to provide reasonable protection
against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
Canada
This Class B digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe B est
confome à la norme NMB-003 du
Canada.
Europe
This digital equipment fulfills the
requirements for RF emission according
to the Class B limit of EN 55022.
This product fulfills the requirements for
immunity according to EN 61000-6-1
residential, commercial and light-
industrial environments.
This product fulfills the requirements for
immunity according to EN 61000-6-2
industrial environments.
This product fulfills the requirements for
immunity according to EN 55024 office
and commercial environments.