Connecting The Power Terminal - Pioneer GM-D8500M Owner's Manual

C __
c _o_"_"_e_d_i_"--=g:....-t_h_e_u_"_i_ts _ _)
SectIon
( - - - - - - - ) .
Co""edi"g the power
termi"al
• The use of a special red battery and ground
wire RD-223, available separately, is recom-
mended. Connect the battery wire directly
to the car battery positive terminal (ffi) and
the ground wire to the car body.
AWARNING
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there is a risk of
overheating, malfunction and injury, including
minor burns.
1 Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifier to the positive (ffi) battery
terminal.
CD
Positive (ffi) terminal
Cl) Engine compartment
Q)
Vehicle interior
G) Fuse (30 A) x 2
®
Insert the O-ring rubber grommet into the
vehicle body.
®
Drill a 14 mm hole into the vehicle body (1/2
in.) .
2 Twist the battery wire, ground wire
and system remote control wire.
Twist
--.
3 Attach lugs to wire ends. lugs not sup-
plied.
Use pliers, etc., to crimp lugs to wires.
CD
Lug
Cl) Battery wire
®
Ground wire
4 Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
CD
System remote control terminal
@ GND terminal
®
Power terminal
En
CD