Power On Settings; Memory - B&K AVR 707 User Manual

Power On Settings

Set the Power On Preferences for the Volume, Source Input, Tuner Station
and the Power On OSD Display titles.
Last Used - When powered on, the unit will return to its' last used state. For
example, if the source input was set to In 1 when powered off, the zone will
power on with the source from In 1.
Power On Preference - The receiver will power on to the selected setting.
Specific volumes or input sources, radio stations or titles may be chosen for
use with the power-on preferences.

Memory

This menu allows a backup to be made of all the customized settings that have been made to the AVR 707. The options in this selection are
backup, restore, or reset. Even if a backup is not made, any customized settings will not be lost during normal day to day operation. It is a
good idea to create a backup once all the settings have
been made.
Backup - All system settings on the receiver will be stored on the EEPROM.
Restore - Recall the system settings that were stored during the previous Backup
Reset - All system settings will be reset back to factory default. Note: A factory reset will erase all prior system backups.
BKcSuite System Settings - Control
62