Route To Home Address; Select The Destination - Clarion NP400 Owner's Manual & Installation Manual

Route to home address
3. Select one of the option on the screen to set the
address. Once the address is set, it will be saved in the
software memory.
4. If the home address was saved previously, the screen
with address will pop up, after you touched the Home
Address button. Start your route.
Display menu, jump to main menu
Select current panned position, after
panning map.
Display map in 3D view
Voice instractions are activated
Page up, page down in displayed list
Step up or step down on menu list
Information about current location on the
map, mode items
Select (check) currently highlighted item
Display spell mode
Cancel button
Reset button
Delete button (Move cell content to Trash
can)
1. Touch the Home Address button on the screen. If the
home address is not set previously, the following screen
will be displayed.
Select the destination
To select the destination press Go To... button on Main
Menu screen. The Go To... screen is displayed.
2. Press the check key to display home address set up
screen.
To start your navigation use one of these modes:
Address or Intersection, Point of Interest,
Favorites, History.
NP400 9