Operating Instructions - Accessory Power GOgroove Instruction Manual

Operating Instructions:

Attaching the GOgroove SoundClip to your Laptop or Netbook Computer
Pull the left and right speakers apart until the (f) Retractable cable is long enough
to attach to your netbook or laptop computer. Open the (g) Speaker clips with
your thumbs and attach to desired position on your computer.
The SoundClip USB Stereo Speaker can also stand upright on any fl at surface for
easy desktop placement. The (g) Speaker clips on the bottom work to support the
SoundClip USB Stereo Speaker upright.
Connecting the SoundClip to Your Computer
The SoundClip USB Stereo Speaker features a Plug-and-Play design that sends
power and audio through a single USB cord. After fi rst making sure your laptop
is on, connect one end of the (2) USB audio connection cable into the (e) USB
connection jack and the other end into the USB port on your computer. The
SoundClip will be automatically recognized and activated upon connection.
For Mac OSX, you may have to adjust your USB audio settings.
Adjusting Volume
The SoundClip USB Stereo Speaker is equipped with on-board volume controls.
Press the (a) Volume down button or (b) Volume up button to adjust the sound as
loud or quiet as you would like. The middle (c) Mute button can be used to quickly
and completely turn off the sound coming from your speakers. When you're ready
to hear your music again, simply press the (c) Mute button and sound will resume.