Never push anything into the holes, slots or other openings of your IGLOO’s case. CAUTION! 4 To ensure a free flow of air around your IGLOO, allow at least 5cm of space above and around 4 Use only a dry cloth to clean your IGLOO. Never use detergents etc.
ENVIRONMENTAL ISSUES PACKAGING When disposing of this product packaging, please ensure that it is recycled. This will reduce the demand for virgin wood pulp, whilst diverting material that would otherwise end up in landfill. PRODUCT AND BATTERIES Recycling - Do not dispose of this product or its remote-control batteries with your domestic rubbish.
YOUR IGLOO ❖ Unpacking the carton Before you start installing your IGLOO, please check you have the following supplied accessories: A power lead with a 2-pin plug A 12V power supply unit cable A coaxial AV phono leads An RF adapter A remote control and two 1.5 V “AA”...
❖ Front panel IR RECEIVE LIGHT S BUTTON & LIGHT CH+ AND CH– BUTTONS Flashes red when your To switch your IGLOO into To change channel by IGLOO receives a signal stepping through them or out of standby from your remote control...
YOUR IGLOO ❖ Remote control Shhh Standby Turns the sound on and off Power your IGLOO up or down with this button Live TV Guide Go straight to the last Go to program listings channel viewed Info Menu Find out more about a programme...
IGLOO and leads. If your TV has component video (Y Pb Pr) inputs, you can connect your IGLOO to your TV using a suitable lead (not supplied) as shown on page 8. This will give a better quality picture on your TV for standard definition only.
Page 8
(see page 11). To set it up later, go to Menu > Settings > Broadband and follow the on-screen instructions. You can also use an Ethernet cable to connect your IGLOO to the Internet as shown below. Connect the cable between your IGLOO and an Ethernet port...
❖ Connecting to the power supply Plug the fixed lead on the 12V power supply unit into the socket labelled ◆ POWER IN on your IGLOO’s rear panel. Plug the 2-way connector on the supplied power lead into the socket on ◆...
Page 10
INSTALLATION ❖ Inserting the batteries in your remote control Before you can use your remote control, you must insert the two supplied AA batteries as follows: Remove the back cover by lifting the latch. Remove the old batteries (if replacing the batteries). Insert the two supplied ‘AA’...
❖ Switching on for the first time Make sure your TV is also switched on and the TV AV channel (input) is correctly selected. A few minutes after you connect your IGLOO to the power supply, the standby indicator lights up green.
21. Watching a programme If you see a programme you want to watch in the channel banner, press OK. If the programme is on now, your IGLOO tunes to it automatically.
More. On the menu that pops up, press U or D to highlight Set Reminder, and press OK. Your IGLOO sets a reminder for you. This means the programme is added to your Planner (see page 15) and a reminder symbol appears on the channel banner, next to the programme, to show you the programme has been added to your Planner.
TV GUIDE ❖ Using the TV guide The TV guide provides you with a listing of all programmes available on all channels, making it easy to find the programmes you want to watch. To display the TV guide, press Guide on your remote control. The start times and the day are shown at the top of the listings.
YOUR PLANNER Your IGLOO sets a reminder for you and the programme is added to your Planner (see the next section). A reminder symbol appears on the TV guide, next to the programme, to show you the programme has been added to your Planner.
Back. Note In order for reminders to be displayed, your IGLOO must be switched on and you must be watching TV. You can change the setting for when the reminder appears (see page 21).
However, the Settings menu can be useful if, for example, you buy a new widescreen TV and you want to make sure your IGLOO makes the best use of the new TV’s features. You can also use the Settings menu to: control who can watch or purchase certain programmes;...
SETTINGS Displaying the Settings menu To display the Settings menu, press Menu on your remote control, and ◆ then use the U or D buttons to select Settings and press OK. Press U or D to highlight the menu item you want, then press OK. ◆...
SETTINGS ❖ Changing video settings You use the Video settings to choose how your IGLOO displays video on your TV. Set the video resolution that’s output from your IGLOO’s HDMI connector ◆ to best match your TV’s native resolution. The available options are 1080i, Auto, 576p, or 720p.
◆ If you have an HDTV, and you connect a separate audio system to the DIGITAL AUDIO OUT connector on your IGLOO, you may have to adjust the S/PDIF Audio Delay setting. This is because the length of time your HD TV takes to display the video information may be slightly greater than the time taken for the audio signal to reach the loudspeakers.
SETTINGS ❖ Changing display settings The Display settings screen lets you choose: Default Subtitle Language - Your choice of language for subtitles, when ◆ programmes are broadcast with subtitles in more than one language. Info Banner Timeout - how long the channel banner remains on-screen. ◆...
(or missed) in the last few seconds. To set up Live Pause, insert an empty USB memory stick into the USB connector on the side or rear panel of your IGLOO. If it is not empty, your IGLOO will erase its contents and reformat it.
SETTINGS ❖ Changing your parental control settings You use the Parental Control screens to: block programmes; ◆ set viewing restrictions by parental rating category; ◆ change your parental control PIN; ◆ About your parental control PIN code To use the Parental Control screens, you must enter your four-digit parental control PIN.
◆ On the Diagnostics screen, highlight Factory Reset and press OK. ◆ Use the number buttons to enter your IGLOO’s 4-digit PIN code (0000). ◆ A message appears asking you to confirm. If you are sure that you want to continue, highlight OK and press OK. To cancel and go back to the Diagnostics screen, highlight Cancel and press OK.
Your TV is not If your IGLOO is connected to your TV via a switched to show component video lead or phono lead, try selecting digital channels. the appropriate AV channel on your TV.
SPECIFICATIONS Due to continued product improvement, this specification may change without notice. General Operating voltage 230 V AC ; 50 Hz Power consumption 20 W (max.) Weight 1.6 kg (packed, including accessories) Dimensions (W x H x D) 247 mm x 39.5 mm x 176.5 mm Operating temperature range 0 °C to +50 °C Storage temperature range 20 °C to +70 °C...
Page 27
NOTICES This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorised by Rovi Corporation, and is intended for home and other limited viewing uses only, unless otherwise authorised by Rovi Corporation. Reverse engineering or disassembly is prohibited.