Selecting Languages (Multi-Language); Changing Audio Type - Pioneer DVL-V888 Operating Instructions Manual

Selecting Languages
(Multi-Language)
AUDIO
Press during playback.
AUDIO : 1 English
AUDIO
2
Press to select the desired
language.
AUDIO : 1 English

Changing Audio Type

AUDIO
Press during playback.
LD
ANALOG STEREO DIGITAL STEREO
ANALOG 1/L DIGITAL 2/R
ANALOG 2/R
DIGITAL 1/L
OPEN/
POWER CLOSE
DISC SIDE
A / B
AUDIO SUBTITLE ANGLE DISPLAY
LAST PLAYBACK
MEMORY CONTROL
MENU
TITLE RETURN
POWER
AUDIO
LAST
MEMORY
TITLE
AUDIO : 2 Spanish
CD, Video CD
DIGITAL 1/L
DIGITAL 2/R
DIGITAL STEREO
Dolby Digital, PCM, and other audio data is recorded on
DVDs in a number of languages, letting you choose the
desired language.
Notes
You cannot switch languages if there is only one language
recorded on the disc.
Language number and setting differ with each disc, so refer to
the disc's instructions.
Some titles may not enable switching between languages. If this
happens, the mark is displayed.
Tip
¶ Depending on the title, you can also make a selection using a menu. To
do this, press the when indications are displayed to call up a
MENU
menu, and select the desired title.
OPEN/
CLOSE
DISC SIDE
A / B
SUBTITLE ANGLE DISPLAY
PLAYBACK
CONTROL
MENU
RETURN
ENTER
OPEN/
POWER
CLOSE
DISC SIDE
A / B
AUDIO SUBTITLE ANGLE DISPLAY
LAST PLAYBACK
MEMORY CONTROL
MENU
TITLE RETURN
¶ Audio type changes each time you press the button.
Notes
You cannot select digital audio if digital audio data is not recorded
on the LD.
You cannot switch audio type when using digital output of Video
CD output (optical, coaxial) (∂ RF output).
With the NORMAL MODE only, you can change audio type.
With LDs, switching to the CX System is possible with some
discs. In this case, you can perform switching with this operation.

Selecting Languages (Multi-Language)

Changing Audio Type

49