Get To Know Bob2 - Westnet BoB2 User Manual

Get to know BoB2
TM
Front Panel
1. ADSL sync light
The adsl sync light indicates if Westnet is talking to
your BoB2
TM
- ADSL link is up and connected
On
Off/flashing - No ADSL connection
2. Internet light
The Internet light shows you when the router is
connected to the Internet
On – Connected to internet
Off/flashing – Not connected to Internet
3. LAN Status light
When a computer is properly connected to the
LAN port on the rear of the router, this light will
illuminate. A solid light means computer or a
network-enabled device is connected. When
information is being sent over the port, the light will
blink rapidly.
On - Your computer is connected
Off - Your computer is not connected.
Blinking - information transmission
8

Get to know BoB2

TM
4. Wireless Status light
The Wireless status light shows you when BoB2 's
TM
wireless is enabled.
- Wireless enabled
On
- Wireless is disabled
Off
5. Storage/3G light
When a USB mass storage device is connected
to BoB2 , this light will illuminate to inform you the
TM
attached storage device is ready for use. BoB2 TM also
accepts a 3G wireless USB modem service.
On – Attached USB Mass Storage or 3G Device is
connected and ready for use
– No attached USB Mass Storage or 3G Device
Off
6. Phone one & phone two status lights
The phone light indicates that your netphone
account has successfully registered on the network.
- Netphone registered successfully
On
Off - No Netphone activity
1
2
3
4
5
6
Get to know BoB2 9
TM