Table of Contents
Advertisement
Just in case you should disable the front panel or IR input via the
USB port, you may require a way to restore those features without
using the USB port again. To restore the Avalon matrix switch
back to factory settings, do the following:
ü Unplug the Avalon for 10 seconds, then plug it back in.
The Avalon should be in standby mode.
ü On the front panel, press 0, 0, 7.
The Avalon will then enter Initialization, and when complete,
return to standby mode. The front panel and IR will work as
normal.
Avalon Matrix Switch User's Guide (document number 42-00001-A)
Restoring to Factory Defaults
29
Advertisement
Table of Contents
