Table of Contents
Advertisement
Select a connector that suits your display. We recommend you to use the HDMI for best
displaying result if your display is capable for HDMI connection. Otherwise, you can use
Component video(YPbPr), Composite video(A/V) or VGA(D-Sub) connector.
To ensure that your display functionally connected, please check the following items after the
connection:
1.
Switch your display's input source to the one you connect the VMP30A with.
2.
Turn the VMP30A on without inserting any memory card and you will see a message "No
Device Present" on the screen(Please insert your memory card now). If there was no screen
or the screen not correctly showed, please keep pressing the
controller every 3 seconds to switch to the correct output.
A:
Stereo audio output jack
B:
Video output jack
C D E:
Component Video jacks
F:
D-Sub port(VGA)
G:
HDMI(High-Definition Multimedia Interface) jack
H:
DC power jack
I:
Power switch
J:
USB port (for USB flash disks/Card readers)
K:
CF card slot (for CF I/CF II cards & Microdrives)
L:
4-in-1 memory card slot (for SD/XD/MS/MS Pro/SM/MMC cards)
3. VMP30A Installation
4
button on the remote
Advertisement
Table of Contents
