Table of Contents
Advertisement
4. VMP30A OPERATION GUIDE
To start using VMP30A for photo/video playback, you have to check the 4 items below:
1.
Make sure the power of your display is ON.
2.
Insert your memory card/flash disk with photos/videos into VMP30A.
3.
Turn VMP30A's power ON.
4.
Switch your display to the correct source.
4.1 Auto-Start
The VMP30A will automatically start playing the photos/videos/music on startup unless:
1.
You did not select the correct output for your VMP30A.
2.
No memory card/flash disk inserted – You will see "No Device Present" shown on the
bottom-right of the screen.
3.
No playable file in your inserted memory card/flash disk – You will also see "No Device
Present" shown on the bottom-right of the screen.
4.
There are more than 1 storage device inserted – The VMP30A will prompt a device selection
screen for you to select the correct device.
5.
You disabled the Auto-Start feature in setup.
4.1-1 Auto-Start Feature Setting
Press
to enter the setup menu. You will find the AUTO START setting under
[SETUP>PREFERENCES]. There will be 4 options – OFF/PHOTO+MUSIC/VIDEO/ALL and you can
select one of them on your demand.
OFF
Disable the AUTO-START feature.
PHOTO+MUSIC
Plays photos with background music on startup repeatedly.
VIDEO
Plays video files on startup repeatedly.
Plays all contents in your memory card by alphabetical sequence on
ALL
startup repeatedly.
8
Advertisement
Table of Contents
