How To Identify Parts Of Vacuum Cleaner; Maintenance Schedule - Eureka 3270 Series Owner's Manual

How to Identify Parts of Vacuum Cleaner

Self-Cleaning Duster
(some models)
Duster Activation Lever
Headlight
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Make sure power switch is in OFF (O) position before plugging in power cord.
Filter
DCF21
Screen
HEPA Filter
HF7
Brush Roll
2 Eureka Customer Service HELPLINE 1-800-282-2886
Handle
Hose
Power Paw
Power Switch
Filter and Screen
(located inside dust cup)
Dust Cup
Nested Crevice Tool
& Extension Wand
HEPA Filter Compartment
Height Adjustment Knob
Brush Roll Cover

Maintenance Schedule

Maintenance Schedule is also located on back side of dust cup.
EXT-U Belt
Cord Retainer
®
DUST CUP – Empty after each use
Press lever to release bottom lid.
Debris will empty.
FILTER DCF21 – Check regularly, clean as needed
Empty debris. Pull back
latch to lift off lid.
Rinse dust cup;
dry thoroughly.
HEPA FILTER HF7 – Replace 6 months
Lay flat, grasp cover and pull off.
EXT-U BELT – Replace worn, cut or out of shape belt
Hose Hook
Dusting Brush
Quick Release Cord Wrap
Carrying Handle
Power Cord
Lower Cord Wrap
Hose Retainer
Handle Release
Close bottom lid
until it clicks.
Pull out filter. Rinse filter and dust cup;
dry thoroughly.
Reinstall filter and Align lid at front; press down
screen inside dust cup. until lid snaps into place.
Lift out filter and replace.
BRUSH ROLL – Clean monthly
www.eureka.com