Eureka 3270 Series Quick Start Manual

QUICK START GUIDE
What's in the carton
STEP
1 1

Easy assembly

Vacuum Body
STEP
2 2
Slide handle onto vacuum body.
Use a phillips
screw driver.
Some models: Secure bottom of
duster chamber to hose retainer.
Tighten with flat-head screw driver.
Wrap cord.

Get ready to vacuum

STEP
3 3
Adjust height for carpet
or bare floor.
Lift latch to remove dust
cup. Empty after each use.

PROBLEM SOLVING

Refer to Owner's Guide.

Important Safeguards

Handle and
Extra Belt
2 Screws
Tighten two screws.
Place hose over hose hook.
Place crevice tool &
wand in front of hose.
Plug into outlet. Step on
handle release to lower
handle into position.
To clean duster, press firmly
to snap into place. Turn on and
push lever down 10 seconds.
Before returning, call
Eureka Customer Service
HELPLINE
1-800-282-2886
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
www.eureka.com
®
Power Paw
Dusting Brush
Crevice Tool and
Extension Wand
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
Moving parts! Make sure power switch is in OFF (O) position before
plugging in power cord. Assemble the vacuum cleaner before using.
chamber. Place duster in chamber
Place dusting brush
behind handle.
Push power switch (I) on.
Turn duster to extend.
Push firmly to collapse
and turn to lock.

MAINTENANCE SCHEDULE

Refer to back of dust cup or Owner's Guide.
3270 Series
SPECIAL FEATURES
Available on some models
Bare Floor Nozzle
and Wand
Duster
Chamber
Self-Cleaning
Duster Stair Hose
Push cord into cord retainer.
Push end of hose into duster
and snap into place.
Snap Power Paw
onto handle.
If vacuum is hard to push,
raise carpet setting.
Attach Power Paw
to end of wand or hose
for furniture and stairs.
®
®