Removing The Stand- 40/46Le530M; Removing The Stand- 60Le630M - Sharp Aquos LC-40LE530M Operation Manual

Removing the stand–
40/46LE530M
For wall mounting with the optional bracket (AN-
52AG4 or AN-37AG2) remove the stand.
Before setting TV on the wall
• Remove the connected cables (DVD, VCR, etc) from the
terminals.
• Detach the four caps at the 4 locations on the rear of the
TV.
1
Unfasten the screw at the location on the rear
of the stand cover and remove the stand cover.
2
1 Unfasten the screws at the 3 or 4 locations on
the stand.
2 Detach the stand from the TV.

40 inch models
NOTE
• To attach the stand, perform the above steps in reverse
order.
• As the TV is very heavy, be careful when moving it.

46 inch models
Removing the stand–
60LE630M
For wall mounting with the optional bracket (AN-
52AG4) remove the stand.
Before setting TV on the wall
• Remove the connected cables (DVD, VCR, etc) from the
terminals.
• Detach the four caps at the 4 locations on the rear of the
TV.
1
Unfasten the screws at the 4 locations on the
rear of the stand.
2
Detach the stand from the TV (hold the stand so
it will not drop from the edge of the base area).
NOTE
• To attach the stand, perform the above steps in reverse
order.
• As the TV is very heavy, be careful when moving it.
23