Valcom V-WTGY Installation Instructions

INSTALLATION INSTRUCTIONS

V-WTGY
Wall Mount Speaker
Gray W/ Black Grille
INTRODUCTION
The interior wall speaker, the V-WTGY, and interior ceiling speaker, the V-C806PK, are capable of
reproducing paging as well as back ground music. The volume may be adjusted by connecting various
combinations on the input screw terminals. The enclosures are made of steel with a durable powder
coated finish. The color of the enclosures can easily be changed to match any décor. A cloth covered
detachable grille is included with the V-WTGY wall speaker. Both units contain 8" full range speakers.
MOUNTING
V-WTGY
Remove the screw holding the mounting bracket
to the enclosure. Mount the bracket using
appropriate hardware such as #8 pan head
screws. After making the required connections,
reattach the enclosure to the mounting bracket.
A Siesmic strapping point is provided.
DIMENSIONS/WEIGHT
V-WTGY
•
10.13" H x 12.31" W x 4.63" D
(25.73cm x 31.27cm W x 11.75cm D)
•
Weight: 4.25 LBS (1.91 kg)
V-WTGY, V-C806PK
1
V-C806PK
Round Ceiling Speaker
White Powder Coat
V-C806PK
Cut an 8.5" diameter hole in ceiling tile.
After connections have been made to the
speaker, attach speaker to ceiling tile using the
mounting hardware provided. NOTE: Where
extra speaker support is needed, a V-9916M
Valcom Bridge and Backbox should be used.
V-C806PK
•
13.00" Diameter x 2.50" D
(33.02cm Diameter x 6.35cm D)
•
Weight: 2.5 lbs. (1.13 kg)
Issue 0
947991