Panasonic CQ-VX100U Operating Instructions Manual page 52

In-dash 7” widescreen color lcd monitor/dvd receiver
Hide thumbs Also See for CQ-VX100U:
Table of Contents

Advertisement

~
WARNING
.c
en
.-
-
e n
c
w
-
W
Installation
"
""~-<'
' ..•" "
-
o
This installation information is designed for professional installers with knowledge
of automobile electrical safety systems and is not intended for non-technical, do-it-
yourself individuals. It does not contain instructions on the electrical installation and
avoidance of potential harm to air bag, anti-theft and ABS braking or other systems
necessary to install this product.
Any attempt to install this product in a motor vehicle by anyone other than a profes-
sional installer could cause damage to the electrical safety system and could result
in serious personal injury or death.
o
If your car is equipped with air bag and/or anti-theft systems, specific procedures
may be required for connection and disconnection of the battery to install this product.
Before attempting installation of this electronic component against the manufactur-
er1s recommendation, you must contact your car dealer or manufacturer to deter-
mine the required procedure and strictly follow their instructions.
FAILURE TO FOLLOW THE PROCEDURE MAY RESULT IN THE UNINTENDED DEPLOY-
MENT OF AIR BAGS OR ACTIVATION OF THE ANTI-THEFT SYSTEM RESULTING IN
DAMAGE TO THE VEHICLE AND PERSONAL INJURY OR DEATH.
o
Overview
This product should be installed by a professional.
However, should you decide to install the product against
the manufacturer's recommendation, these operating
Instructions do not contain electrical installation instruc-
tions. You must contact your car dealer or manufacturer
for electrical connection instructions to avoid possible
damage to your electrical safety systems and resulting
injury or death. (Please refer to the "WARNING" state-
ment above).
Your next step is to decide where to install the unit. The
instructions in these pages will guide you through the
remaining steps:
• Identify and label the car wires.
• Connect the car wires to the wires of the power con-
nector.
• Install the unit.
• Check the operation of the unit.
If you encounter problems, please consult your nearest
professional installer.
AWarning
• This unit operates with a 12 V DC negative ground
auto battery system only. Do not attempt to use it
with any other system. Doing so could cause seri-
ous damage.
Before you begin installation, look for the following items
which are packed with your unit.
• Operating Instructions (including "Limited Warranty"
and "Customer Services Directory").
• Installation Hardware .....Needed for Installation.
4
I
CQ-VX100U

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents