Detailed Setup - Speedtech Instruments AE-2 User Manual

If you know the latitude/longitude in decimal
degrees only, use the whole number for the
degrees entry, and multiply the decimal by 60
to calculate the minutes. For example, 35.407°
is 35 degrees, and 24 minutes (.407 x 60).
Note: the continental US lies within Latitudes
N25° – N49° and longitudes W67° – W123°.
For locations outside of North America, use
www.mapquest.com or www.worldatlas.com.
If there is trouble accessing your local
coordinates, please e-mail Speedtech at
info@speedtech.com for assistance or call
703-430-8055.

DETAILED SETUP

If unit is off, press and hold MODE button for
two seconds to turn ON. There is a set-up for
the present mode and for the future mode,
depending on which mode the unit is in when
the programming mode is entered (press the
TIME button to switch modes). It is best to set
the present mode settings first.
1. Press and hold the SET button for two
seconds to enter the set-up mode (skip to #2
if setting future mode); "12Hr" will flash.
Press the – or + button to select 12Hr
(AM/PM) or 24Hr ("military" time).
Press SET button to confirm.
2. The hour will flash. Press the – or + button
to set the current hour (note AM or PM if in
12Hr mode). Press the SET button to confirm.