Table of Contents
Advertisement
Don't touch the lens of the projector. It may
cause damage of it.
If the projector requires cleaning inside con-
tact the service centre. Accumulated dust
can cause mechanical failure.
Use the indicated type of power source on
the projector. If you are not sure of the type
of power available, consult your dealer or
customer service center.
Don't use the projector when the power
cord or the plug is damaged or the con-
necting part of wall socket is loose.
It may cause electric shock
or a fire.
NOTES
Don't use any sharp tools on the projector
as this will damage the casing.
Place the projector where people will not
trip or tread on the power lead.
Don't place the projector or the remote
control on a heater or use in a heated car.
Contact your dealer for replacing a new
lamp.
6
Advertisement
Table of Contents
