General Specification: Lifting And Supporting The Vehicle; Crossbeam - CITROEN C8 2002 Handbook

GENERAL SPECIFICATION: LIFTING AND SUPPORTING THE VEHICLE

Tooling.

[1] Crossbeam

: (-). 0010.
Front lifting on one side.
Position the jack (4) at the strongpoints provided for this purpose on each side
of the front crossmember between the bumper (2) and the engine (3).
Front central lifting.
Using a jack equipped with a crossbeam (sufficiently rigid) take the weight at the
two strongpoints on the front crossmember.
Side lifting.
At the front and at the rear
Take the weight at the sill, by means of the crossbeam [1], as close as possible
to the jacking point.
Position a stand at the jacking point provided for the purpose of lifting the
vehicle with the jack.
WARNING : Avoid the battery tray on the right hand side.
Side lifting at both front and rear
Take the weight at the sill, by means of the crossbeam [1].
Position stands at the jacking points provided for the purpose of lifting the
vehicle with the jack.
WARNING : Lifting at the rear of the vehicle using the crossbeam is
STRICTLY PROHIBITED.
E2AK02ZD E2AF006C E2AK030D E2AK031D
6