Advertisement
Available languages
Available languages
one; Copy is for selecting the channel to
be copied to the current memory.
PRESET: Auto-search is for automatic
search of channels; Search is for manual
search of channels; Position is for
Troubleshooting
Before you request repair, follow the listed methods to check the device.
Trouble
No picture and sound
Power switch is off.
No picture
No sound
Poor reception
Dark picture
Vague picture or unstable Check that the antenna is correctly adjusted. Possibly the
picture
No color
Remote control doesn't
work
selecting the memory position for the
current channel; Skip is for defining a
channel to be skipped while selecting
channels.
Possible reason
AC adapter or automobile adapter is not properly
connected. Uncertified power is being used.
TV/AV is not properly chosen.
Check to see if the channels are selected correctly.
Readjust automatic channel tuning.
Check to see if the audio volume is off or audio system
is improperly set and the earphone is inserted. Poor signal
or the sound elimination function is on. Audio system is not
properly chosen.
Check if the audio system is correct. Antenna is correctly
adjusted and that the channel is tuned correctly.
Check that the brightness and contrast are set correctly.
Also that the environmental is too low
grounding signal is too weak. Snowflake interference is
possibly affected electric wave interference from vehicle
motors, trains, high-voltage power wired or neon lights.
Check that the color and the color system are adjusted
correctly.
Check to see that whether batteries are exhausted and
strong sunshine's on the receiver.
Instruction manual
7
Advertisement
