Remote Control - Yamaha RX-V367 Owenrs Manual

Remote control

Problem Cause
The remote control Wrong distance or angle.
does not work or
function properly.
Direct sunlight or lighting (from
an inverter type of fluorescent
lamp, strobe light, etc.) is striking
the remote control sensor of this
unit.
The batteries are weak.
The remote control ID of the
remote control and this unit do not
match.
External components The remote control code is not
cannot be controlled
correctly set.
using the remote
control.
See
Remedy
page
The remote control will function within a —
maximum range of 6 m / 20 ft, and no more
than 30 degrees off-axis from the front
panel.
Adjust the lighting angle, or reposition this —
unit.
Replace all batteries. 4
Match the remote control ID of this unit and 46
the remote control.
If this unit does not work when you press —
i
Cursor B / C / D / E
(on the remote
control), do the following.
When the key does not work during DVD
c
disc menu operation: press the Input
selector (on the remote control) again.
When the key does not work during Option —
menu/Setup menu operation: press the key
corresponding to the current menu operation
again.
Even if the remote control code is correctly —
set, there are some models that do not
respond to the remote control.
APPENDIX
Troubleshooting
51
En