Operating Instructions; Combustible; Lighting - Drolet YUKON Instructions Manual

Oil burning stove

Hide thumbs

Table Of Contents

Table of Contents

• Your stove has been designed to work with oil #1 or #2. DO NOT USE GASOLINE, CRANKCASE OIL OR

ANY OIL CONTAINING GASOLINE. The manufacturer declines all responsibility regarding damages

caused by the use of other combustibles.

•

Make sure to use oil without impurities which may plug the filters or the carburetor (valve). Impurities will

cause an improper combustion.

BEFORE LIGHTING THE STOVE:

• Make sure that :

The tank is full;

The taps are open;

• Make sure that the (3) rings are in the right

position. Each of them is stamped with the

letter A, B, or C (figure 13).

• Make sure that the oil flow control knob is

set at « 0 » (figure 14B).

• If

not

already

done,

carburetor's lever located behind the stove

(figure 14A).

• Wait for the carburetor to fill up with oil and

let the level stabilize.

• BEFORE ATTEMPTING TO LIGHT YOUR

STOVE, MAKE SURE THAT THE OIL

FLOW CONTROL KNOB IS SET AT "0".

Figure 14B: CARBURETOR (VALVE)