Compaq Wireless LAN MultiPort W200 User Manual page 45

Problem
Windows 98 SE & Windows
2000 Professional:
The Client Manager icon
does not appear in the
system tray.
Windows 98 SE & Windows
2000 Professional:
The Client Manager icon in
the system tray is always
red.
For more information consult the user's guide provided on the
CD-ROM.
User's Guide
Solving Problems (Continued)
Solution
• Make sure the Wireless LAN MultiPort
W200 is seated correctly. Refer to Chapter
2 for instructions.
• Make sure the Wireless LAN MultiPort
W200 status light is solid green. If you are
using a notebook computer and the
Wireless LAN MultiPort W200 status light is
not on, press
LAN MultiPort W200.
• Make sure the drivers are installed. Select
Start > Settings > Control Panel >
Network and see if the Compaq Wireless
LAN MultiPort W200 is listed as a network
adapter.
• Refer to Chapter 2 for more information.
• The wireless LAN software may not be
installed. Refer to Chapter 2 for more
information.
• Make sure your computer and each network
client to which you are trying to connect
have the same Network Name (SSID). The
Network Name is case sensitive.
• Make sure your WEP settings are correct.
• Make sure you are within range of an
access point or network client.
Troubleshooting
Fn+F2
to enable the Wireless
B-3