Table of Contents
Advertisement
To access this menu, press [MENU] button on the remote
control. If you wish to make changes to any of the default
▲/▼/◄/►
settings, use the scroll
settings press [OK] button.
To exit this menu at anytime, press [EXIT] button.
TV System - Choose from the following options
NTSC
Normally used for discs from North America,
Japan etc
PAL
The standard for discs from UK/Europe, most
of Asia, Australia etc
Auto
For both NTSC and PAL
TV Type - Choose from the following options
4:3
PS Traditional picture format, often used on
old fi lm
4:3
LB Traditional picture which has been
adapted for widescreen
16:9
Widescreen picture format
Default - This option allows you reset all DVD settings to
factory settings.
Tone - Choose from the following options
+
Increases the treble (high frequency sound)
-
Increases the bass (low frequency sound)
buttons. To confi rm any
Dynamic Range - This is the diff erence between the quietest
and loudest sounds. This setting works only with DVD discs
recorded in Dolby digital.
Full
Set this to listen with the range recorded on
the disc
4/8
Set this to listen with a range equivalent to a
normal television
2/8
Set this to listen with a smaller diff erence
between the maximum and minimum
volume
Dual Mono
Stereo
Outputs 2 channels of sound both left and
right
Mono L
Outputs left side sound
Mono R
Outputs right side sound
Mix Mono
Outputs a single channel of sound but mix
between right and left
DVD Menu
21
Advertisement
Table of Contents
