Change Of Hinge Side - Vintec-Cellar V 160 DP Instructions For Use Manual

Change of hinge side.

1) Dismantle the top
hinge. This one is to
be used later as top
hinge at the opposite
side. Lift off the top
door.
2) On appliances with
a door closer on
the upper door, this
door closer should
be removed and
remounted on the
opposite side.
3) Dismantle the middle
hinge. Lift off the bottom
door. Mount the hinge
screws again.
4) Remove the kick panel.
The bottom hinge is dismounted
at the 3 screws. The hinge is
turned 180° and mounted
on the opposite side.
4) Dismantle the screws in
the middle of the new
hinge side. Mount
the bottom door and
screw on the middle
hinge.
5) Adjusting the bottom door:
Loosen the 3 screws in the
bottom hinge and push
the bottom hinge to the
required side. Tighten the
screws and mount the
kick panel.
6) The kick panel is mounted and the
hole plugs are
mounted on the
opposite side.
7) Ajustment of the top
door: loosen the screws
in the hinge above the
door, loosen the hinge
above the door and
turn the hinge to the
wanted side. Tighten the
screws.
8) Move the handle.
7
GB