Gear Head WC4500AFW User Manual page 6

AMCAP SOFTWARE
Using the menu at the top of the AMCAP window, you can access the settings of the AMCAP
software:
File Set Capture
File
Allocate File
Space
Save Capture
Video As
Exit
Devices Device Name
(depending on
your system
configuration)
Options Preview
Audio Format
Audio Capture
Filter
Video Capture
Filter
Video Capture
Pin
Capture Start Capture
Stop Capture
Capture Audio Select this option to enable audio capture.
Closed
Captioning
Maser Stream
Set Frame Rate Select this option to set the frame rate of your webcam.
Set Time limit
Help Click to view the information of your software.
When AMCAP is running, double-click the camera icon in the taskbar on your desktop, you can
adjust the following settings.
Open Property Setting
Page
Effect
Zoom
Special Effect Click to select a special effect for the previewed image in the screen. NOTE: Part of the special
effects in the drop-down menu can not be enabled if you select "Face Tracking" or "Zoom".
Snap Shot Click and define the size of the captured image by choosing from the drop-down menu.
Zoom Click to open the "Zoom" window, in this window, you can zoom in or zoom out the previewed
image in the screen. NOTE: This function can not be enabled if you select "Face Tracking".
Face Tracking Click to enable face tracking function. NOTE: This function can not be enabled if you have
enabled "Zoom".
Exit Click to exit the program.
Select this option to set a name to your captured file. Note: The end of the name must
include ".avi", otherwise, the file will not be recognized by the computer..
Select this option to allocate the disc space to your captured file.
Select this option to save your captured file to a different location.
Select this option to exit the AMCAP software.
This section lists all connected video/audio capture device(s) on your computer (NOTE:
Please note that you must select a video capture device and an audio capture device
before you can use your Webcam with AMCAP).
If you have multiple video/audio devices and want to change the device(s) for
video/audio capturing with AMCAP, select to check the device(s) on the list.
Select this option, the preview image will appear in the screen.
Select this option to set the audio format in the pop-up window.
Select this option to adjust the volume for the built-in microphone of your webcam in the
pop-up window.
Select this option to adjust the following parameters for the captured video: Brightness,
Contrast, Hue, Saturation, Sharpness, Gamma.
Select this option to adjust the following parameters for the captured vedeo: Frame rate,
Compression, Output size.
Select this option to start recording.
Select this option to stop recording video.
Your webcam doesn't support this function.
Keep this setting as "Audio" to prevent lag between video and audio.
Select this option to set the time limit for the video and audio recording.
In this window, you can adjust the following parameters for the video file
captured: Brightness, Contrast, Gamma, Hue, Saturation, Sharpness,
Click to select a special effect for the previewed image in the screen.
Click to open the "Zoom" window, in this window, you can zoom in or zoom out
the previewed image in the screen.
6