Hardware Description; Software Installation - Gear Head WC4500AFW User Manual

HARDWARE DESCRIPTION:

SOFTWARE INSTALLATION:

Your webcam is plug-and-play, but the enclosed interpolation software allows you to take
snapshots at resolution up to 8MP. To install the software, please follow the instructions below.
1. Turn on your computer.
2. Plug the USB connector of your Webcam into an available USB 2.0 port on your computer.
(NOTE: The webcam software can not be installed if the webcam is not connected to your
computer.)
3. Insert the enclosed Software CD into the CD-ROM drive of your computer.
4. The Webcam Software will start automatically. If it does not start automatically, please click
"Start", then "Run...", type "D:\Setup.exe" into the dialog box. (NOTE: "D:\" represents the
drive letter assigned to the CD-ROM drive you are using. If D is not the letter assigned to
your CD-ROM drive, please replace D with the appropriate drive letter). Then click "OK".
5. The "USB Video Device ...InstallShield Wizard" will appear on the desktop.
6. Follow the on-screen instructions to finish the installation. Please restart your computer after
the installation is finished.
7. You will find the "AMCAP" icon on your desktop，and a camera icon in the taskbar on your
desktop.
NOTE: The "AMCAP" software will only recognize the webcam when the webcam is connected
to the same USB port during the software installation. Please do not connect the webcam to a
different USB port.
NOTE: For Windows
administrator of the computer to run the software. Please right click the "AMCAP" icon to run
the software as the administrator for the very first time.
Lens
®
Vista and 7 users, the first time "AMCAP" is run, Windows
Built-in
Microphone
5
Snapshot
Button
®
requires the