Table of Contents
Advertisement
TV Menu operation
TV Menu Operation | Channel menu | Picture menu | 3D Settings
TV Menu Operation
AV
To access this menu, press [MENU] button on the remote
control. To enter a menu press [OK]
If you wish to make changes to any of the default settings, use
the scroll
buttons. To confi rm any settings press
(▲/▼/◄/►)
[OK] button.
To exit this menu at anytime, press [EXIT] button.
Channel menu
Auto Tuning - Allows you to retune the television for all digital
channels, digital radio stations and analogue channels.
Digital Manual Tuning- Allows you to manually tune your
digital signal.
Analogue Manual Tuning - Allows you to manually tune your
analogue signal.
Programme Edit - Allows you to delete, skip and add favourite
channels.
14
Tip: If you do not press
any buttons for 10
seconds, the menu will
automatically exit. You
can change the length
of time before the menu
exits automatically - see
'Menu Duration' section.
Picture menu
Picture Mode - Choose from the following presets.
Standard
Default settings
Dynamic
Recommended settings for fast moving pictures
Mild
Set to be lighter in colour and less bright
Personal
Lets you manually alter all the settings
Ecohome
Power saving mode
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Increases the colour from black and white.
Tint - Lets you increase or decrease the level of tint within the
picture.
Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature - Choose from the following presets.
Normal
Default settings
Warm
Increases red within the picture
Cool
Increases blue within the picture
Noise Reduction - Choose from the following presets.
Off
Turns noise reduction off
Low
Minor system adjustment
Middle
Medium system adjustments
High
Maximum system adjustments
Default
Default settings
Advertisement
Table of Contents
