Suunto AMBIT2 R 2.0 User Manual page 94

2.
20.9.
16:30
Tuesday
5.
PAIR
[...............]
HR belt
[...............]
TIP: You can also activate the heart rate belt by moistening and
pressing both electrode contact areas.
Troubleshooting: Heart rate belt pairing fails
If the heart rate belt pairing fails, try the following:
Check that the strap is connected to the module.
•
Check that you are wearing the heart rate belt correctly (see
•
8.4 Putting on heart rate belt ).
Check that the electrode contact areas of the heart rate belt are
•
moist.
94
3.
[...............]
PAIR
[...............]
6.
Hold belt
next to
device
<30cm/
0.98ft
4.
PAIR
[...............]
HR belt
[...............]