Setting tire sealant/sealing set
1. MAIN MENU
>TYRE PRESS.
>SETTINGS
> TYRES
> SPARE WHEEL
Select and confirm.
2. Select SEALING SET.
3. Confirm selection.
The display automatically returns to the TYRE
PRESSURE sub-menu (filling information).
f Inflate tires according to the displayed
pressure differences.
A warning appears on the multi-purpose display if
the speed limit of 50 mph (80 km/h) is exceeded.
The reminder SPARE WHEEL/SEALING SET
OPERATION? appears each time the ignition is
switched on.
For information on spare wheel/sealing set opera-
tion: Please see the chapter "NOTE ON SPARE
WHEEL/SEALING SET OPERATION" on Page 140.
140
Multi-Purpose Display and Instruments
Warning!
Risk of accident, resulting in serious
personal injury or death if a tire repaired with
tire sealant is in use.
f Avoid hard acceleration and high cornering
speeds.
f Do not exceed maximum speed of 50 mph
(80 km/h).
f Please observe the safety and operating
instructions on the tire compressor.
f Use tires repaired with sealant only over short
distances.
For information on handling and filling the
sealant: Please see the chapter "USING TIRE
SEALANT" on Page 296.
Note on spare wheel/sealing set operation
Each time the ignition is switched on,
the reminder SPARE WHEEL/SEALING SET
OPERATION? appears for approx. 10 seconds if a
spare wheel type (spare wheel, collapsible spare
wheel or sealing set) has been set.
1. Select YES or NO:
- YES if a spare wheel, collapsible spare wheel
or tire sealant is still being used.
- NO if the spare wheel, collapsible spare
wheel or tire sealant has been removed.
2. Confirm selection.
The selected item is then accepted.
The current settings are displayed if NO is
selected.