License Plate Lights - Porsche Cayenne Owner's Manual

Replacing bulbs at rear
1. Remove tail light.
For information on removing tail lights:
Please see the chapter "REMOVING TAIL
LIGHT" on Page 336.
2. Unscrew fastening screws D with the cross-
head screwdriver from the tool kit.
3. Remove lamp bracket C.
338
Minor Repairs
E - Rear fog light
F - Turn signal light
G - Tail light
4. Replace the defective bulb (bayonet fitting).
Insert lamp bracket and screw in fastening
screws.
5. Install tail light.
For information on installing tail lights:
Please see the chapter "INSTALLING TAIL
LIGHT" on Page 337.
6. Check operation of lights.

License Plate Lights

Changing bulb for license plate light
1. Unscrew both screws A and remove the light.
2. Push the bulb holder apart and pull the bulb
out.
3. Replace defective bulb.
4. Insert light, initially tighten both screws A and
then screw in uniformly.