Mpeg Out; Virtual Surround; Digital Out; Sacd Playback - Pioneer DV-S733A Operating Instructions Manual

7 DVD Setup Menu

MPEG Out

• Default setting: MPEG 3 PCM
You only need to make this setting if you connected
the player to another component (AV amplifier,
etc.) using one of the digital outs.
If your AV amplifier (or other connected
component) is compatible with MPEG audio, set
this to MPEG, otherwise set it to MPEG 3 PCM
(MPEG audio is converted to more compatible
PCM audio). Check the manual that came with
the other component if you're unsure whether it
is MPEG audio compatible.
Audio1

Digital Out

• Default setting: On
If at any time you need to switch off the digital
audio output, set this to Off, otherwise leave it
On. Note that you can't switch on/off the
optical and coaxial outputs individually.
Audio1

SACD Playback

• Default setting: 2ch Area
SACD discs can be divided up into several
different areas – stereo audio, 5.1 channel
audio and, for hybrid SACDs, standard CD
audio. The SACD Playback setting enables you
to select which area of the disc you want to
play.
Audio1
42
En
A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS 3 PCM
DTS Out —
Linear PCM Out — Down Sample On
MPEG Out MPEG
MPEG 3 PCM
Digital Out
SACD Playback 2ch Area
—
SETUP
Move Exit
A2 Video1 V2 Language General
Audio DRC — Off
Dolby Digital
Dolby Digital Out —
DTS 3 PCM
DTS Out —
Linear PCM Out — Down Sample On
MPEG 3 PCM
MPEG Out —
Digital Out On
SACD Playback Off
Move Exit
SETUP
A2 Video1 V2 General
Language
Audio DRC — Off
Dolby Digital Out — Dolby Digital
DTS 3 PCM
DTS Out —
Linear PCM Out — Down Sample On
MPEG Out 2ch Area
Digital Out Multi-ch Area
SACD Playback CD Area
Move Exit
SETUP
Note
If you select an area that isn't on the disc
loaded, a different area of the disc will play. For
example, if you choose standard CD audio but
the disc loaded is not a hybrid SACD, the stereo
SACD audio will play.

Virtual Surround

• Default setting: Off
If you connected your DVD player using only the
stereo analog outputs and set Audio Out (see
below) to 2 Channel, you can simulate surround
sound by setting Virtual Surround to TruSurround.
Language General
A1 Audio2 Video1 V2
Virtual Surround —
Legato PRO
Audio Out —
Speaker Setting
Gain Setting —
Hi-Bit —
CD Digital Direct —
Move
Note
• There is no effect when the audio source is DVD-
Audio, DTS or 96 kHz LPCM or during CD, MP3
or SACD playback.
• The digital audio output level is reduced when
playing 2 channel Dolby Digital DVDs or Video
CDs with TruSurround selected. If you play a
multichannel Dolby Digital DVD with Dolby
Digital to PCM conversion (see page 41) and
TruSurround selected, there is no digital output.
• How good the surround effect is varies with the
disc.
TruSurround
TruSurround uses technology that simulates
multichannel surround sound using only two
speakers.
Off
TruSurround
2Channel
Fix
On
Off
Exit
SETUP