Husqvarna CTH2542T Operator's Manual page 12

KNOW YOUR TRACTOR
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR
Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments.
Save this manual for future reference.
CLUTCH/BRAKE
PEDAL
THROTTLE
CONTROL
CHOKE
CONTROL
HEIGHT
ADJUSTMENT KNOB
Our tractors conform to the applicable safety standards of the American National Standards Institute.
ATTACHMENT CLUTCH SWITCH - Used to engage the
mower blades, or other attachments mounted to your
tractor.
ATTACHMENT LIFT LEVER - Used to raise and lower
the mower deck or other attachments mounted to your
tractor.
CHOKE CONTROL - Used when starting a cold engine.
CLUTCH/BRAKE PEDAL - Used for declutching and brak-
ing the tractor and starting the engine.
FREEWHEEL CONTROL - Disengages transmission for
pushing or slowly towing the tractor with the engine off.
HEIGHT ADJUSTMENT KNOB - Used to adjust the mow er
cutting height.
OPERATION
SERVICE
REMINDER/
IGNITION
HOURMETER
SWITCH
FREEWHEEL
CONTROL
Fig. 9
12
ROS "ON"
POSITION
03083
SERVICE REMINDER/HOURMETER - Indicates when
service is required for the engine and mower.
IGNITION SWITCH - Used for starting and stopping the
engine.
LIFT LEVER PLUNGER - Used to release attachment lift
lever when changing its position.
LIGHT SWITCH - Turns the headlights on and off.
MOTION CONTROL LEVER - Selects the speed and
di rec tion of tractor.
PARKING BRAKE - Locks clutch/brake pedal into the
brake position.
THROTTLE CONTROL - Used to control engine speed.
REVERSE OPERATION SYSTEM (ROS) "ON" POSITON - Al-
lows operation of mower deck or other powered attachment
while in reverse.
ATTACHMENT
CLUTCH SWITCH
LIFT LEVER
PLUNGER
LIGHT SWITCH
ATTACHMENT
LIFT LEVER
PARKING
BRAKE
MOTION
CONTROL
LEVER