Names Of Each Control - Teac MC-DX20 Owner's Manual

A POWER
Press this switch to turn the unit on or off (standby).
The main unit is powered via the subwoofer. You need to first
turn on the subwoofer.
The equipment draws a nominal amount of power from the
AC outlet even with its POWER switch in the OFF position.
B
FUNCTION
Use this button to select a source (CD, AUX or TUNER).
C
FM/AM
Use this button to select AM or FM.
D
Remote Sensor
When operating the remote control unit, point it towards
here.
E
MEMORY/CLOCK SET
In CD mode, use this button to program tracks.
In TUNER mode, use this button to store preset channels into
memory.
This button is also used for clock adjustment.
6

Names of Each Control

F REPEAT/PTY
In CD mode, use this button for repeat playback.
In FM TUNER mode, use this button to start PTY search.
G STEREO/MONO/MP3
In FM TUNER mode, use this button to select stereo or
monaural.
During playback of a MP3 disc, use this button to search track
name.
During playback of CD, use this button to switch the ESP
function on or off.
H
SKIP (.//) / TUNING
In CD mode, momentarily press this button to skip tracks.
Hold down this button to search for a part of a track.
In TUNER mode, momentarily press this button to tune in
stations.
In Standby mode, these buttons are used to set or adjust the
clock and the timer.
I
STOP (H)
Use this button to stop playback of CD/MP3.