Pioneer S-VSL6 Operating Manual
Pioneer S-VSL6 Operating Manual

Pioneer S-VSL6 Operating Manual

Speaker system
Table of Contents

Advertisement

Available languages

Available languages

S-VSL6
Thank you for buying this Pioneer product. Please read
through these operating instructions so you will know how to
operate your model properly. After you have finished reading
the instructions, put them away in a safe place for future
reference.

Before you start

• The nominal impedance of this speaker system is 6
ohms. Connect the speaker system to an amplifier with a
load impedance ranging from 4 to 16 ohms (a model with
"4 – 16 Ω" displayed on the speaker output terminals).
In order to prevent damage to the speaker system resulting
from input overload, please observe the following precau-
tions:
• Do not supply power to the speaker system in excess of
the maximum permissible input.
• When connecting or disconnecting anything in your AV
system, make sure the amplifier is switched off.
• When using a graphic equalizer to emphasize loud
sounds in the high-frequency range, do not use excessive
amplifier volume.
• Do not try to force a low-powered amplifier to produce
loud volumes of sound (the amplifier's harmonic
distortion will be increased, and you may damage the
speaker).
SPEAKER SYSTEM
SISTEMA DE ALTAVOCES
Caution: installation
• Do not place the speakers on an unstable surface. It
could present a hazard if it falls, as well as damaging the
equipment.
• Switch off and unplug your AV equipment and consult
the instructions when connecting up components. Make
sure you use the correct connecting cables.
• The speaker system grill cannot be removed. Do not try to
forcibly remove it since doing so may damage the grille.
Caution: in use
• Don't use the speakers to output distorted sound for long
periods of times. This can result in a fire hazard.
• Do not sit or stand on the speakers or let children play on
the speakers.
• Do not put large or heavy objects on top of the speakers.
OPERATING GUIDE
GUÍA DE OPERACIÓN

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer S-VSL6

  • Page 1: Before You Start

    S-VSL6 SISTEMA DE ALTAVOCES GUÍA DE OPERACIÓN Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
  • Page 2 Pioneer disclaims all responsibility for any Confirm your Accessories losses or damage resulting from improper assembly, installation, insufficient strength of the installation materials, misuse, or • Speaker wire natural disasters. • This speaker system weighs about 11 kilograms. Floor installations should be on a flat and stable floor surface;...
  • Page 3: Installation Precautions

    I Adjusting the Bass Range Connection to Amplifier This speaker system is supplied with acoustic control Terminals are provided on the rear panel of the speakers for material which can be affixed to the bottom of the stand as connection to an amplifier. a means of adjusting the bass frequency range.
  • Page 4: Specifications

    A speaker system can be used without problem immediately after purchase, but its design performance characteristics will be best demonstrated after breaking them in by playing music for several dozen hours. Published by Pioneer Corporation. Copyright © 2003 Pioneer Corporation. All rights reserved.
  • Page 5: Antes De Comenzar

    EL USUARIO. TODA REPARACIÓN DEBERÁ SER eléctrica para las personas. EFECTUADA POR PERSONAL TÉCNICO CUALIFICADO. Le agradecemos la compra de este producto Pioneer. Lea con atención este manual de instrucciones para aprender cómo utilizar adecuadamente este modelo. una vez que haya leído las instrucciones, guárdelas en un lugar seguro para poderlas...
  • Page 6 Pioneer no se hace responsable de ningún Confirme sus accesorios tipo de pérdida o daños resultantes de un montaje inadecuado, instalación, resistencia insuficiente de los materiales de • Cable de altavoz instalación, empleo indebido, ni por desastres naturales. • Este sistema de altavoces pesa unos 11 kilogramos. Las instalaciones sobre el piso deben realizarse sobre una superficie del piso plana y estable;...
  • Page 7: Conexión A Un Amplificador

    I Ajuste de la gama de graves Conexión a un amplificador Con este sistema de altavoces se suministra un material de En el panel posterior de los altavoces hay terminales para control acústico que puede fijarse debajo del soporte como conectarlos a un amplificador.
  • Page 8: Especificaciones

    Publicado por Pioneer Corporation. Copyright © 2003 Pioneer Corporation. Todos los derechos reservados.
  • Page 9 ÷ Ω ÷ Ω Ω ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷ ÷...
  • Page 10 ¶ ¶ ¶ 50cm 20cm ¶ ¶ ¶ ¶ ¶...
  • Page 11 ª · ¶ ª ¶ ¶ ¶ · ¶ ¶ ¶ ¶...
  • Page 12 253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270 K002E <TFJEF/03D00001>...

Table of Contents