Understanding Display Messages - Pioneer XR-MR7 Operating Insructions

Understanding Display Messages

Below is a list of messages you'll see during normal operation with a brief explanation of what they mean. If you need more information, turn to the page
indicated.
Message
OPEN
CLOSE
TOC READ
CDR SYNC–1
CDR SYNC–ALL
PMA REC
SKIP SET
SKIP CLEAR
ERASE ALL
ERASE DISC
ERASE LAST
118
En
Description
The disc tray is open.
The disc tray is closing.
The recorder is reading the disc's TOC (Table of Contents).
Wait for the message to disappear.
The unit is in 1-track automatic digital recording mode.
Recording starts when the recorder detects the digital source
input signal.
The unit is in all-track automatic digital recording mode.
Recording starts when the recorder detects the digital source
input signal.
The recorder is writing TOC data to the discs PMA (Program
Memory Area). Never turn off the power while this display is
showing.
Confirm that you want to set a skip ID by pressing the
SKIP ID SET.
Confirm that you want to clear a skip ID by pressing the
SKIP ID CLEAR.
Confirm that you want to erase all tracks recorded on a
CD–RW disc by pressing ENTER.
Confirm that you want to re-initialize the CD–RW disc by
pressing ENTER.
Confirm that you want to delete the last track on a CD-RW disc
by pressing ENTER.
Page
Page
30
Page
64-65
Page
66-71
Page
51–52
Page
80-81
Page
81
Page
87
Page
89
Page
87