Sony VPL-FX500L Brochure & Specs page 3

Features
Excellent Total Cost of Ownership
and ECO-friendly Design
Long-lasting Lamp
By incorporating newly developed
high-performance lamps and
advanced lamp-control technology,
the VPL-FX500L delivers a
recommended lamp replacement
time of approximately 8,000 hours.*
* In Standard mode (with two lamps).
Fail Safe Twin-lamp System
The VPL-FX500L's twin-lamp system
provides peace of mind and
economical operation. One lamp can
output a total of 7,000 lumens but a
second lamp is built in to provide
automatic backup should the
primary lamp fail. The two lamps
can be alternately used, achieving a
recommended lamp replacement time
of approximately 8,000 hours, saving
maintenance time and cost.
Low Power Consumption
The VPL-FX500L offers remarkably
low power consumption, allowing
users to make significant savings on
electricity costs.
ECO MODE
Eco Mode optimises combinations
of the following functions.
• Lamp mode
"High / Standard"
- Saving the consumption of
lamp wattage.
• Power Saving mode
"Lamp Cutoff / Projector
Standby"
- When set to "On", the projector
goes into power saving mode
if there is no operation for 10
minutes without any signal input.
Lamp Cutoff ; The lamp goes off.
The lamp lights again when a signal
is input or any key is pressed.
Projector Standby ; "Standard / Low"
In "Standard", power consumption
is 12W and is reduced to 0.3W in
"Low"*.
*Network function cannot be operated
VPL-FX500L
8000 hours
Conventional
Model
2500 hours
Longer Lamp Exchange Time
Fail Safe Twin-lamp System
ECO MODE Key
With a single push of the ECO MODE key on either the projector or the
supplied Remote Commander™ unit, the user can select an energy-
saving setting in the ECO Mode menu.